Skip to main content
The CN101 timer is programmed with the keys on its front panel. This page shows how to set the current time, configure the on/off programs and choose the operating mode.

​
Start-up and clock setting

1

Reset the timer

Press the C (RESET) key to start the timer.
2

Set the current day and time

Hold the ◷ (clock) key and press D+, H+ and M+ to adjust the current day, hour and minute.

​
Setting the programs

If you don’t need all 16 settings, press ◷ to exit programming.

​
Operating mode

Press MANUAL to switch between the modes shown on the display:
  • ON: the equipment stays on permanently
  • AUTO: the equipment switches on and off according to the programs
  • OFF: the equipment stays off permanently
The C/R key cancels or restores a program (Cancel/Recovery).
  • Set the times in chronological order. Programs cannot overlap.
  • If no key is pressed for 10 seconds, the timer exits programming automatically and the data is not saved.
  • Functions 3, 4 and 5 (H+, M+ and clock) cannot be used simultaneously.